In the past, the only solution for filling the cracks was to repair them by ripping it and pouring a new surface, but for now, the cracks can easily be filled by resurfacing driveways. Over time, your concrete driveways may develop cracks due to the harsh weather conditions and wear and tear of driving on it.
And after getting cracks, your driveways may not give a striking look. This is the right time to give a new look to your driveways by resurfacing it. It is quite easy and effortless than ripping the entire driveway and pouring a new surface.
It was the time when the driveway was once given a beautiful look not anymore to look ravishing. Concrete is the most common yet traditional option of flooring used for residential as well as commercial paving. The beautiful concrete beauty got faded and cracked. In general, your driveway has turned into a sight that you no longer want to see.
The wear and tear are mainly due to intense temperatures, pollution, nasty weather conditions, and the vehicles’ weight driving through it. So what are the solutions for this situation? This is a job that can be done on your own, or you can hire a paving company for this task. But if you do this on your own, it will help you to keep the cost down. We let you know step by step that how you can do this job on your own:
Clean the surface:
The first and most essential step before you start resurfacing is to make sure you have cleaned it. Cleaning is done to make the surface even for the resurfacing to be effective. For the optimal cleaning, you can use pressure washers to ensure that you get a perfect clean of the driveway.
Remove the dirt:
If the surface has any oil stains, then you need to use a degreasing agent to remove the stains. Clean the cracks by scraping them out and pour a small amount of bleach in it. And after ten minutes, clean it using a pressure washer.
Put a layer of concrete:
The next important step is to put a layer of concrete on the driveway. Use the trowel to smooth out and level all the cracks and spots on the surface. And once the first coat dries, add a second layer, and skim over the entire area. Additionally, you are allowed to apply a clear sealer for giving a professional finishing. 
These steps are an outline that gives you an idea on how to resurfacing driveways. By following these easy steps, you can easily resurface your driveways on your own.
